Info: 'The project has been salvaged and is OK now.'
1:
Bounds: x1=264, y1=68, x2=322, y2=88
Type: 4
Info: 'Ok'
DITL_6037_Changes successfully saved.txt
Items: (2 entries)
0:
Bounds: x1=69, y1=9, x2=321, y2=91
Type: -120
Info: 'The last changes to the ^0 have been performed successfully .The project has been salvaged and is OK now.'
1:
Bounds: x1=262, y1=104, x2=320, y2=124
Type: 4
Info: 'OK'
DITL_6036_Changes not saved.txt
Items: (2 entries)
0:
Bounds: x1=68, y1=9, x2=320, y2=102
Type: -120
Info: 'The last changes to the ^0 have been undone.The project has been salvaged and is OK now.'
1:
Bounds: x1=262, y1=119, x2=320, y2=139
Type: 4
Info: 'OK'
DITL_6035_Project Not Closed Properly.txt
Items: (2 entries)
0:
Bounds: x1=69, y1=9, x2=351, y2=105
Type: -120
Info: 'The project “^0” was not closed properly by user ^1 at ^2, ^3.The project integrity will be verified now. Please stand by to see the results.'
1:
Bounds: x1=292, y1=114, x2=350, y2=134
Type: 4
Info: 'OK'
DITL_6034_Operation Not Executed.txt
Items: (2 entries)
0:
Bounds: x1=69, y1=9, x2=277, y2=43
Type: -120
Info: 'The last operation was not executed.'
1:
Bounds: x1=217, y1=62, x2=275, y2=82
Type: 4
Info: 'OK'
DITL_6033_Wrong serial number.txt
Items: (2 entries)
0:
Bounds: x1=69, y1=9, x2=277, y2=43
Type: -120
Info: 'Sorry, name and serial number do not match.'
1:
Bounds: x1=217, y1=62, x2=275, y2=82
Type: 4
Info: 'OK'
DITL_6032_File Locked.txt
Items: (2 entries)
0:
Bounds: x1=228, y1=72, x2=288, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=12, x2=305, y2=49
Type: -120
Info: 'The file “^0” is locked!'
DITL_6031_Too many variants.txt
Items: (2 entries)
0:
Bounds: x1=72, y1=4, x2=345, y2=51
Type: -120
Info: 'The maximum number of variants(^0) is reached.'
1:
Bounds: x1=276, y1=60, x2=334, y2=80
Type: 4
Info: 'OK'
DITL_6030_Project Name Too Long.txt
Items: (2 entries)
0:
Bounds: x1=72, y1=4, x2=345, y2=61
Type: -120
Info: 'Invalid project name. The name must not start with "." and its length must not exceed ^0 characters.'
1:
Bounds: x1=282, y1=71, x2=340, y2=91
Type: 4
Info: 'OK'
DITL_6029_Set Date To Now First.txt
Items: (2 entries)
0:
Bounds: x1=240, y1=68, x2=298, y2=88
Type: 4
Info: 'Ok'
1:
Bounds: x1=96, y1=8, x2=313, y2=58
Type: -120
Info: 'Before storing data you have to set the current project date to “Now” first.'
DITL_6028_In Use By Another.txt
Items: (2 entries)
0:
Bounds: x1=236, y1=80, x2=294, y2=100
Type: 4
Info: 'Ok'
1:
Bounds: x1=76, y1=8, x2=309, y2=63
Type: -120
Info: 'The project “^0” is already in use by user “^1”.Try again later.'
DITL_6027_Operation cancelled.txt
Items: (2 entries)
0:
Bounds: x1=270, y1=84, x2=328, y2=104
Type: 4
Info: 'Ok'
1:
Bounds: x1=71, y1=2, x2=330, y2=71
Type: -120
Info: 'Due to the previous error the ^0 operation was aborted. Please notice that some files were not stored.'
DITL_6026_Wrong system time.txt
Items: (2 entries)
0:
Bounds: x1=72, y1=4, x2=345, y2=73
Type: -120
Info: 'Project “^0” cannot be opened because the current system time does not match the history data!Adjust system time and try again!'
1:
Bounds: x1=276, y1=84, x2=334, y2=104
Type: 4
Info: 'OK'
DITL_6025_Cannot Create Folder.txt
Items: (2 entries)
0:
Bounds: x1=72, y1=4, x2=345, y2=51
Type: -120
Info: 'Folder “^0” cannot be created because a ^1 with this name exists!'
1:
Bounds: x1=276, y1=60, x2=334, y2=80
Type: 4
Info: 'OK'
DITL_6024_Replace Existing?.txt
Items: (3 entries)
0:
Bounds: x1=19, y1=61, x2=77, y2=81
Type: 4
Info: 'Ok'
1:
Bounds: x1=156, y1=62, x2=214, y2=82
Type: 4
Info: 'Cancel'
2:
Bounds: x1=7, y1=5, x2=246, y2=58
Type: -120
Info: 'Replace existing “^0”?'
DITL_6023_New Project created.txt
Items: (7 entries)
0:
Bounds: x1=304, y1=188, x2=364, y2=208
Type: 4
Info: 'OK'
1:
Bounds: x1=182, y1=188, x2=291, y2=208
Type: 4
Info: 'Define Users…'
2:
Bounds: x1=65, y1=4, x2=376, y2=53
Type: -120
Info: 'You are now logged on to the project “^0” as user “^1”.'
3:
Bounds: x1=65, y1=52, x2=376, y2=85
Type: -120
Info: 'The current password for the administrator is “^2”.'
4:
Bounds: x1=10, y1=92, x2=367, y2=125
Type: -120
Info: 'For security reasons you should immediately change the administrator's password.'
5:
Bounds: x1=10, y1=130, x2=367, y2=179
Type: -120
Info: 'Please note that you will never be able to open the project without entering the name and password of a registered user. So don't forget your password!'
6:
Bounds: x1=17, y1=24, x2=49, y2=56
Type: -64
Info: 'Ë'
DITL_6022_Not Enough Room On Disk.txt
Items: (2 entries)
0:
Bounds: x1=329, y1=78, x2=387, y2=98
Type: 4
Info: 'OK'
1:
Bounds: x1=85, y1=4, x2=405, y2=68
Type: -120
Info: 'There is not enough room on the disk “^0” (an additional ^1 KB are needed).'
DITL_6021_No Visible Doc Nodes.txt
Items: (3 entries)
0:
Bounds: x1=295, y1=57, x2=353, y2=77
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=8, x2=364, y2=41
Type: -120
Info: 'Struct node “” does not lead to visible doc nodes!'
2:
Bounds: x1=43, y1=172, x2=103, y2=192
Type: 4
Info: 'OK'
DITL_6020_Refuse Multistore_fetch.txt
Items: (4 entries)
0:
Bounds: x1=289, y1=115, x2=347, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=97, y1=8, x2=350, y2=110
Type: -120
Info: '^0 more than one document is only allowed if each component leads exactly to one version group!Adjust your current filter settings and try again!'
2:
Bounds: x1=43, y1=172, x2=103, y2=192
Type: 4
Info: 'OK'
3:
Bounds: x1=285, y1=111, x2=351, y2=139
Type: -64
Info: '–'
DITL_6017_Refuse Store.txt
Items: (2 entries)
0:
Bounds: x1=244, y1=109, x2=304, y2=129
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=7, x2=334, y2=104
Type: -120
Info: 'The document “^0” is locked by “^1”.You cannot store new versions to documents that are locked by other users!'
DITL_6016_Refuse Lock.txt
Items: (2 entries)
0:
Bounds: x1=275, y1=124, x2=335, y2=144
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=7, x2=346, y2=117
Type: -120
Info: 'The document “^0” is locked by “^1”.You must ask ^1 or the project leader to unlock it before you can lock it.'
DITL_6015_Confirm Lock Admin.txt
Items: (3 entries)
0:
Bounds: x1=260, y1=120, x2=320, y2=140
Type: 4
Info: 'Lock'
1:
Bounds: x1=128, y1=120, x2=246, y2=140
Type: 4
Info: 'Leave it alone'
2:
Bounds: x1=72, y1=8, x2=354, y2=114
Type: -120
Info: 'The document “^0” is locked by “^1”.Locking it for you means that the locking of ^1 is nullified.'
DITL_6014_Refuse Unlock.txt
Items: (2 entries)
0:
Bounds: x1=258, y1=120, x2=318, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=8, x2=349, y2=111
Type: -120
Info: 'The document “^0” is locked by “^1”. You must ask ^1 or the project leader to unlock it.'
DITL_6013_Confirm Unlock Admin.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=120, x2=321, y2=140
Type: 4
Info: 'Unlock'
1:
Bounds: x1=121, y1=120, x2=228, y2=140
Type: 4
Info: 'Keep Locked'
2:
Bounds: x1=72, y1=8, x2=348, y2=111
Type: -120
Info: 'The document “^0” is locked by “^1”. Do you want to unlock this document?'
DITL_6012_Not Enough Privileges.txt
Items: (2 entries)
0:
Bounds: x1=76, y1=8, x2=298, y2=45
Type: -120
Info: 'You don't have enough privileges to do that!'
1:
Bounds: x1=232, y1=52, x2=290, y2=72
Type: 4
Info: 'Ok'
DITL_6011_Not In Design Mode.txt
Items: (2 entries)
0:
Bounds: x1=280, y1=56, x2=338, y2=76
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=8, x2=344, y2=45
Type: -120
Info: '^0 is not allowed in "Design Mode".'
DITL_6010_In Design Mode Only.txt
Items: (2 entries)
0:
Bounds: x1=272, y1=56, x2=330, y2=76
Type: 4
Info: 'OK'
1:
Bounds: x1=108, y1=8, x2=338, y2=44
Type: -120
Info: '^0 is allowed in "Design Mode" only.'
DITL_6009_MustWorkOnDocNode.txt
Items: (2 entries)
0:
Bounds: x1=304, y1=106, x2=362, y2=126
Type: 4
Info: 'OK'
1:
Bounds: x1=98, y1=7, x2=378, y2=94
Type: -120
Info: 'There are more than one version group node for this component!You must select the specific version group via one of the version group nodes.'
DITL_6008_No Object Available.txt
Items: (2 entries)
0:
Bounds: x1=312, y1=72, x2=372, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=88, y1=8, x2=372, y2=63
Type: -120
Info: 'There is no object for this component that matches the current filter settings!'
DITL_6007_Confirm Delete.txt
Items: (4 entries)
0:
Bounds: x1=52, y1=76, x2=120, y2=96
Type: 4
Info: 'Filtered'
1:
Bounds: x1=236, y1=76, x2=296, y2=96
Type: 4
Info: 'Cancel'
2:
Bounds: x1=152, y1=76, x2=212, y2=96
Type: 4
Info: 'All'
3:
Bounds: x1=48, y1=28, x2=300, y2=45
Type: -120
Info: 'Which Nodes do you want to delete?'
DITL_6006_No Such User.txt
Items: (2 entries)
0:
Bounds: x1=223, y1=72, x2=283, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=82, y1=13, x2=284, y2=62
Type: -120
Info: 'User “^0” does not exist or password is incorrect!'